WILIER TRIESTINA FILANTE DISC Shimano Dura-Ace Di2 R89170 34/50 Road Bike Black/Red 2021

Due to delays in global supply chains, Manufacturer may have replaced some original components with equivalent or higher quality components. In some cases, the bike delivered may differ from the images.

The natural evolution of Cento10PRO, Wiliers high-end aerodynamic bike used by professionals.

Filante SLR is an extremely lightweight aerodynamic bicycle with a significantly improved stiffness to weight ratio. They used the same materials and technology as in the construction of the Wilier 0 SLR.

The result is a top-ofthe- range, aerodynamic frame that complements their pure ascent bike used by Astana Pro Team and Total Direct Energie.

Aerodynamic
Filante SLR was designed to maximise aerodynamic performance in real environmental conditions. The design was based on data recorded in the wind tunnel (where the wind is very clean for homogeneous empirical results) while also taking the real world into account. In this way, Wilier not only evaluate typical wind tunnel data (yaw angles from -20° to + 20°), but also consider environmental turbulence that impacts the bike for many different reasons.
That’s why they redesigned the profiles, starting with the standard NACA airfoils/ KAMM tail that no longer have sharp edges on the back. The softened angles improve performance even when the air flow is disturbed.
The inside of the front fork has been widened by 7 mm, making it 13.6% wider than the Cento10PRO. In doing so, they moved the fork blades away from the wheel, reducing turbulence and improving aerodynamics.

Lightweight and responsive
The new aerodynamically optimised profiles helped Wilier eliminate extra weight in the frame’s construction. The shape has no sharp edges, therefore requires less material and less resin in the corners. This improves homogeneity of the inside, reducing the frame’s weight to a mere 870 grams.
The assembled bike with top-of-the-range specifications weighs 6.8 kg.
The Filante monocoque handlebar is made of the same carbon we use for the Wilier 0 SLR. Thanks to the different types of carbon they used in combination with the Liquid-Crystal Polymer, the unique fibre positioning and the construction technology, they have reached an absolute level of lightness and stiffness.
The lower overall weight compared to the exceptional stiffness increases STW by 12.5%. This improvement is clearly felt with the steering precision and the feeling of safety at high speeds.

240 fittings aviable
Since the fork steerer tube is no longer bevelled, Wilier can install up to 35 mm of spacers under the handlebar. By combining frame sizes, handlebar sizes and spacers, they can achieve 240 different fittings, with no overlap between combinations. This doubles with the two available seat posts, with 15 mm or 0 mm setback.

Handlebar and integrated cables
In addition to being lightweight, (350 grams for the 101x42 size) the new integrated carbon monocoque Filante Bar handlebar houses the brake and derailleur cables, directing them toward the inside of the frame. Its design is very simple, with sinuous and rounded lines for maximum grip ergonomics.

Balanced Design
Six sizes, one feeling. The sections of the tubes of various sizes were designed to maintain consistent rigidity, handling quality and comfort on every frame size.