VITUS SOMMET 297 CR 27,5/29'' Enduro MTB Grey 2023

Due to delays in global supply chains, Manufacturer may have replaced some original components with equivalent or higher quality components. In some cases, the bike delivered may differ from the images.

Whether new to the black runs or a seasoned full-face enduro thrillseeker, the Vitus Sommet 297 CR Mountain Bike delivers the rush. The rush of air, the rush of trees passing you in a blur, the rush of tyres through dirt, the rush of light, the rush of sounds - the brief snapshots that flood your senses and place you confidently in the zone.
And then there’s the rush that boils up inside you and the feeling of total control as you float from takeoff to landing and rip down descents, from bike park to big mountain. The rush as you roll out at the bottom of the trail and chase one last uplift. The rush that pushes you to explore your limits without overstepping the mark. This is why you do it.

The Sommet is a bike that you sit within, not perch on top. It’s a powerful rider position and together you are a team. Eagerly shred the refined berms and manicured obstacles of a trail centre, but take a step into the wild and that’s where this bike really comes alive, revelling in the unpredictability of natural features and steep, technical ground. With volume added to the carbon front triangle, stability is rock solid without compromising agility. This balanced ride and reliable Shimano components will inspire you to graduate onto trails that may otherwise have felt out of reach. It’s not a bike for taking just any line, it’s a bike for taking the best line. A bike that tracks so accurately it rewards you with time. Time to line up the next obstacle and pick your route as the trail unfolds in front of you.

Whether threading the needle through Enduro tape or dropping into your favourite descent, speed comes easily to the Sommet. It thrives in the chaos of steep and turbulent trails. Bringing calm where all around there is frenzy.

By designing our new Sommet and Escarpe platforms in tandem we decided early on that we were going to focus on a Carbon front triangle only with a aluminium rear triangle. This gives the perfect blend of stiffness and compliance. We increased the tube volume in the front triangle to improve stiffness, giving better track holding and stability through the full size range.

We have updated the geometry to give a more confidence inspiring ride. Key changes are slacker head angles and lower BB drop. We have also steepened the effective seat tube angle and made it progressively steeper as you go up the size range. This ensures that each frame size has an optimal sagged saddle position with no compromise. By measuring saddle height at saddle lay back we looked at the position of the saddle relative to the bottom bracket to ensure when the bike was in sag you had an optimal pedaling position. The reason we steepened the seat angle on the larger frame sizes was to ensure that the saddle layback wasn't too far behind the bottom bracket.

The Sommet comes with an adjustable flip chip to adjust your geometry as required. We have built and optimised the head angle and BB drop around the "low" setting. However the "high" setting allows you to increase head angle by + 0.5 degrees and lift the bottom bracket by 6mm. Giving you the option to tweak your ride depending on the terrain you're riding.

Robust frame protection on downtube, seat stay and chain stay. Chain stay protection features a soft rubber to quieten chain slap.

Due to bottlenecks and delays in global supply chains, this bike will come with either SRAM DB8 or Shimano M6120 brakes.